dali controller

DMX Signal Amplifier is dedicated to amplify, distribute, and insulate the signal that comes from the lighting system equipment when it is connected to the bus of DMX512.

  • It’s specially designed for signal shaping amplification for DMX512 signal which attenuated after a long-distance transmission, realize extending the signal transmission distance;
  • Need to use the multiple signals expansion output control, increase DMX l signal amplifier to distribute multi-channel control.
  • 1 channel input, 2-3 channels distributed output, there is a independently photoelectricity insulation of >3KV between Input and output terminals, and output terminals among 3 channels, so as to avoid the expensive equipment such as light, DMX driver, precise digital lighting controller, being burnt by the possible high voltage which caused from the wrong wire connection and a broken equipment, also can avoid the signal interference between each DMX equipment, to assure it works safely.
DMX Signal amplifier
  • DMX Signal Amplifier LT-123
    Input voltage DC12V (mated power supply adaptor)
    Input DMX signal 1 CH (photoelectricity isolation >3kv)
    Output DMX signal 3 CH (photoelectricity isolation >3kv)
    DMX512 socket: XLR-3 plug/Green terminal
    working temperature -30℃~65℃
    Dimension L192×W80×H41mm
    Package Size L270×W90×H46mm
    Weight (G.W) 563g
  • DMX Signal Amplifier DIN-121
    Input voltage DC12V-DC24V
    Input DMX signal 1 CH (photoelectricity isolation 1kv)
    Output DMX signal 2 CH (photoelectricity isolation 1kv)
    working temperature -30℃~65℃
    Dimension L112×W35×H67(mm)
    Package Size L114×W37×H70(mm)
    Weight (G.W) 135g
  • Total 1 Page 2 Records